دستگاه کوانتومتر(اسپارک آنالایزر)| کوانتومتر,اسپارک آنالایزر

دستگاه کوانتومتر جهت آنالیز مواد در صنایع مختلف از قبیل آهن و استیل،غیرفلزی،متالورژی،بازرسی مواد،تجهیزات شیمی وکلیه آزمایشات روتین مورد استفاده قرار میگیرد.مشخصات دستگاه قابل ارائه به شرح زیر است: تلفن: 09120767566 - 44953066 - 44953065 The configuration of the product Direct Reading Spectrometer Main Parameters Excitation light source: Supply voltage: 50Hz, 220V ± 1% Input power: 1.0KVA Charging capacitor: pre-combustion 8μF, exposure 1.5μF Peak Current: pre-combustion 100A, exposure 20A The main circuit peak pressure: 300VDC (with automatic adjustment of peak pressure) Ignition circuit: pulse amplitude: +15 KV Auxiliary gap: Using Tunnel Diode Discharge frequency: 200 Hz ~ 600 Hz Sample sets of gap: 4mm Spectrometer: Analysis band range: 140 ~ 800nm Machine engraved concave grating: Curvature radius of 750mm Depicts the density: 1667/mm Incidence angle: 35 degrees Allows a maximum of channels: 24 Spectrometer Local temperature: 35 °C ± 0.5 °C Control System: Measurement and Control System: The single board computer measurement and control, data exchange with the Host Computer Reproducibility: RSD ≤ 0.2% Photomultiplier tube high voltage power supply: Stability: 8 hours is better than 0.5% Common element content range channel table of ferrous metal Element Content range% Channel Element Content range% Channel Fe 0.002~0.50 1 Bi 0.001~0.50 1 P 0.001~2.0 1 La 0.005~0.50 1 S 0.001~0.35 1 Ce 0.005~0.50 1 B 0.0005~0.20 1 Si 0.001~5.0 1 Sn 0.002~0.50 1 Mg 0.005~1.0 1 Sb 0.002~0.50 1 Mn 0.001~20.0 2 As 0.001~0.30 1 Al 0.001~6.0 1 C 0.0025~4.0 1 V 0.0005~6.0 1 Mo 0.001~10.0 1 Ti 0.005~3.0 1 W 0.01~22.0 2 Co 0.002~15.0 2 Cu 0.005~2.5 1 Pb 0.005~0.50 1 Ni 0.001~30.0 2 Nb 0.005~3.0 1 Cr 0.001~30.0 2 Zr 0.005~0.10 1 ...